MB-60M

Due to the design and restricted space on the chassis transfer belt conveyor’s angle on mobile concrete batching plant is steep and require chevron type rubber belt. Generally, chevrons are difficult to clean and create material spillage on the mixer platform and all around the belt. Simple scrapers are not performing well. All MEKA mobile batch plants are equipped with cleaning brush system with electrical drive by default.

What is left after the cleaning system is being collected by drip trays which discharge all the spilled material in one place. All MEKA mobile concrete batching plants are equipped with aggregate drip trays which help to keep the mixer platform and area around the transfer belt clean.

Heavy Main Chassis: Heavy main chassis minimizes the vibrations occurring during normal operation coming from the loading process, belt operation and mixing. Less vibration not only increases the accuracy but also increases the weighing speed which contributes to overall capacity.

Separate Weighing Hoppers: On all MEKA concrete mixing plants weighing hoppers for cement, water, additives and other materials are separated from the mixer frame and are installed on a separate chassis to minimize vibrations. Installing these directly on the mixer frame transfers the vibrations coming from the mixer to the scales. It affects the weighing process which becomes less accurate and requires more time to finish. Both accuracy and speed are negatively affected.

Multi-Loadcell Design: Cement and water scales are equipped with 2 loadcells to optimize the load distribution and to maximize the accuracy. On the other hand, cardan connections allow free movement and prevent the loadcell and other connection from breakdowns. MEKA never installs weighing hoppers on mixers.

Due to heavy duty chassis design, none of MEKA mobile concrete batching plants require front supports. The absence of front supports doesn’t only reduce the installation time but also offers useful operation characteristics allowing for the mixer truck to approach from 3 points (180 degrees) and drive through. This feature is very useful for strict and narrow site conditions.

Many of the competitors are using narrower transfer belts to reduce the cost. This application increases the aggregate transfer time which means less overall capacity. MB-60M and MB-100M are equipped with 800mm and 1000mm transfer belts respectively to maximize the stated capacity.

We offer only premium parts from global well-known brands with our concrete batch plants. Most of the equipment can easily be found on global markets. This ensures long-term reliable continuous operation with minimum possibilities of break-downs.

Wide service platforms on the mixer chassis and service platforms on the weighing level allow safe and easy servicing, which is very important from health safety perspective.